Cabinet Heater – Hot Air Furnace KHG-200

Cabinet Heater – Hot Air Furnace KHG-200

200,000 KHG-200 Alborz hot air cabinet heater, in 3 models of natural gas, diesel and dual fuel, is used in large halls such as sports halls, industrial halls, public places, etc. The thermal power of the device is 200,000 kilocalories per hour and the heatable space is 2000-5000 cubic meters.
200,000 cabinet heater is a heating device that uses an electric blower installed next to a heat exchanger, after sucking cold air from the environment and passing this cold air through the heat exchanger, it causes heat exchange from hot surfaces and heated air. transfers to the environment either directly or through the channeling system. This heat exchanger receives heat directly from the burner. Heating in hot air furnaces and industrial heaters is completely automatic and has advantages such as intelligent control and safety of fuel and oxygen compared to old heating systems. The production of carbon monoxide in hot air furnaces is very low due to complete combustion; the exhaust gases from combustion are released in a controlled manner. The heat exchanger is connected to the chimney through a pipe to discharge the gases from combustion. Hot air furnace in large models can be connected to special channels for heat transfer.

Advantages:

• The best type of torch with an Iranian brand
• Testing of all components and parts in the production line
• It has a chimney suitable for the capacity of the burner
• Thermal insulation with a thickness of one inch of glass wool
• It has an electrical panel equipped with original electronic components
• It has a blower forward fan with a 3KW Iranian electric motor
• Ability to order as ventilation from the bottom of the device (reverse)
• Two hands of oven painting, resistant to decay and moisture
• It has a 120 degree 3-stage Honeywell thermostat for the safety and durability of the combustion chamber
• The ability to install an ambient thermostat to reduce energy consumption and accurately control the ambient temperature
• Heat exchangers made of stainless steel and in the form of radiators to increase the thermal efficiency of the device
• The central combustion chamber (boiler) is made of stainless-steel sheet with thickness, diameter and length suitable to create maximum thermal radiation with high efficiency.

Click here to view other heating products