Polymer Cellulose Cooler 7000 BCF-85, Alborz Air Conditioning

  • BLDC motor with efficiency of at least 90%
  • Reduced electricity consumption and higher cooling efficiency (Energy Grade A)
  • Engine speed control (aeration rate) from 1 to 100 according to the user’s needs
  • Increased ventilation, no vibration and very quiet by installing a polymer fan
  • Cooler stand with the ability to adjust the height and level of the device
  • Polymer body resistant to sunlight and decay
  • Ten cm cellulose pad with high cooling efficiency
    Mesh filter to prevent insects and dust from entering
  • Reducing the cost of maintenance and repairs by eliminating belts, pulleys and bearings
  • Equipped with thermostatic panel and radio remote control
  • It has a level meter floater
  • Washing and draining the water in the cooler pan
  • It has a magnetic water pump
  • Displaying the water level of the cooler pan on the panel
  • Automatic and manual control of temperature and ventilation (thermostat)
  • Rapid reduction of ambient temperature using a 10 cm high-quality cellulose pad
  • Stopping the water pump operation system if the water level is low (preventing the pump from burning)
  • Compensating the loss of aeration in a completely intelligent way, more aeration and changing the engine speed according to the channeling conditions

25,500,000 تومان

25,500,000 تومان

Description

Polymer Cellulose Cooler 7000 BCF-85, Alborz Air Conditioning

7000 BC polymer cellulose cooler is the first polymer cooler produced with energy grade (A) in Iran, which, with a unique body design and the use of a very resistant polymer fan, in addition to increasing ventilation, moves without vibration and very quietly.

This product is equipped with a BLDC motor, type (Direct Drive) with an efficiency of at least 90% and a 70% reduction in electricity consumption compared to normal motors. The ability to control the engine speed (aeration rate) works from one to 100 revolutions according to the user’s needs.

Technical Specifications of Front-Draft Cooler 7000 Alborz BCF-85

توضیحات کولر 7000 نیرو تهویه البرز

 

The use of the best cellulose pads in the cooler with a thickness of 10 cm increases the cooling efficiency by at least 30% (evaporation efficiency of about 90%) in the cooler, it causes high absorption of water in the pads, which ensures the cooling rate of the cooler at the highest level. It also eliminates the need to change the filter every year, which is common in water coolers.
The presence of a water drain pump in the device has made it possible for the consumer to automatically drain the cooler water in areas with high water hardness.
This type of Alborz cooler model has more controllability due to the use of high efficiency motors. Alborz polymer cellulose cooler model BCF-85 with BLDC motor has a lower sound level than conventional water coolers due to the removal of belts and pulleys. Also, by automatically increasing the engine speed in long ducting, it provides the maximum possible ventilation and as a result creates more ventilation than a normal cooler. To order the product, you can refer to the page of the Sanabad store or call 09155308082 for guidance and order the product.

 

بنر معرفی کولر پلیمری سلولزی نیرو تهویه البرز

Reviews 0

Reviews

There are no reviews yet.

Be the first to review “Polymer Cellulose Cooler 7000 BCF-85, Alborz Air Conditioning”

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.

محصولات مرتبط